How to use a Jigsaw

How to Use a Jigsaw

Jigsaw is an essential power tool to have, whether you are a Professional or just a DIYer working on your favorite side project. They are inexpensive and easy to handle, as-compare to other bigger and heavier jigsaws such as Miter jigsaw, Circular jigsaw, or Tabletop Jigsaws.

They can cut through Wood, Metals, Plastic, Fiber, Glass, Ceramic Tiles, Acrylic, and many more materials. Whether you need to make a straight cut or curved cuts, you don’t have to worry about it because a good jigsaw can handle all types of work. But keep in mind that different materials need different types of blades, with different TPI and type of material a blade is made from. So you need to choose the right blade for your jigsaw in order to get a proper cut in the material you want to cut. We made a detailed review on different types of blades for you, check it out for more information on different types of Jigsaw blades

Jigsaws come in various types and models, such as Corded or Cordless Jigsaw, T-shank or U-shank blades Jigsaw. We have made a detailed review on different types and models of Jigsaws to help you out

Follow the below given steps

STEP 1. Precautions:

Always take precautions first before using Jigsaws or any power tool. Wear proper gloves, safety goggles, and a mask in case you accidentally inhale the sawdust, which could be harmful to you. And also read the manual of your Jigsaw to understand the features of your tool or Read this guide. Check if your Jigsaw is on the list.

STEP 2. Choosing Blade:

It’s important to choose the right blade for your jigsaw. It all depends on the intent of your work. If you need to cut wood, you’ll need a 6-10 Tpi blade to make a precise cut. And if you need to cut through metal or plastic, you need a blade with a higher Tpi 24-32 because metal is a hard material, so it needs higher teeth count with low blade speed to cut through.

STEP 3. Setting up the Jigsaw:

Now let’s set up your Jigsaw. First, put the blade in your Jigsaw. Make sure the jigsaw is unplugged or the switch is off, now insert the blade in a jigsaw clamp, most of the newer Jigsaws have a pull lever to lock the blade, and some need to screw the blade. Once you clip the blade try to pull it out to make sure if it fits in properly.

STEP 4. Setting up the Material:

Mark the material with a pencil or pen where you want to cut. Clamp the material to the table securely, so it won’t move when you’re cutting through it. Make sure to leave enough space between clamps, so that the Jigsaw’s shoe can move easily and won’t run off the track.

STEP 5. Cutting the Material:

Place your jigsaw on the material and press the foot against the surface of the material. Don’t let the blade touch the material before you start cutting as it may cause the blade to break or bend, or even damage the material. Line up the blade to marks where you want to cut and pull the trigger. Once the Jigsaw starts running at full speed, move the blade towards the material, and it will start cutting naturally. Don’t force the blade to cut through it, as it can damage the blade and the material both.

STEP 6. Clean up:

When you’re done cutting the material, make sure to sand the edges for smooth finishing. You can have a look at some of the Best Belt Sander here. Unplug the jigsaw, clean all the dust from the material and Jigsaw, unhook the blade, clean it and place the Jigsaw and Blade at their safe location.